1. 작동 전압이 너무 많이 변동하여 산업용 마더보드 및 카드에 크거나 작은 전류가 발생하고 때로는 하드웨어가 손상됩니다. 따라서 과전압으로부터 보호할 수 있는 전원 공급 장치를 선택하거나 전압 조정기를 추가하는 것이 매우 중요합니다.
2. The overclocking has exceeded the fire. Sometimes the industrial display does not light up, and sometimes it crashes after entering the system. In severe cases, the CPU will be burned out.
3. If the industrial host is running normally and there is a sound of hard disk running, but the industrial display is not bright, it may be that the industrial display is broken, or the signal line of the industrial display is not connected well or broken, or the power supply of the industrial display is not plugged in.
4. When the industrial tablet computer is turned on, only a single long sound of "di, di" is heard, which may be a memory problem. Try another slot, if it still fails, it may be that the memory is broken.
임베디드 태블릿 PC
5. The virus causes the embedded tablet computer to crash.
6. The embedded tablet computer is connected to the network, and there is a hacker intrusion, resulting in a crash.
7. The machine runs too slowly, causing the illusion of crash.
8. The file .Dll in the system sub-directories such as System is lost, causing the Windows system to be paralyzed.
9. The industrial motherboard and card are loose due to poor contact, or the slot on the industrial motherboard is broken, or the display card, memory and other accessories are broken, causing the industrial display to not light up.
10. The system registry information was modified incorrectly, causing the Windows system to fail to start.
11. A bug in the embedded tablet computer software caused a crash.
12. The running software conflicts with each other. For example, running 32-bit and 64-bit software at the same time may cause a crash.
13, windows7, 8, 10 systems need to use part of the hard disk as virtual memory. If the remaining space of the hard disk is too small, it will also cause the embedded tablet computer to crash.
