Industrial computer crash faults can be roughly divided into four categories

Jun 01, 2021

메시지를 남겨주세요

In essence, industrial automation is to allow modern machinery and equipment to replace the traditional manual industrial chain, and the operation of automation equipment cannot be separated from the industrial computer. Industrial computer will also have crashes in daily work. What are the reasons for common crashes?


Determining the cause of the crash is a relatively complicated task, but industrial computer crashes can be roughly divided into the following four categories:


A. The quality of accessories is poor. Such as CPU, memory stick, graphics card, hard disk, etc. If the quality of the accessories is poor, when the machine installs WIN98, NT4.0 SCO UNIX, it will be found that the installation is not smooth in the past, and some even cannot be installed.


B. Poor contact of the bottom plate. The operating system can be installed smoothly. After the system is installed, the user finds that some user equipment may not be used in the system, and the serial port and keyboard cannot be used, etc., just change the motherboard to another machine.


C. The motherboard itself is faulty. Due to the components of the motherboard itself, the industrial computer host may fail to pass the BIOS self-check after it is started. Some IDE and FDD interfaces are not working, causing system read-write problems and crashes.


D. The host will crash for three to five days for a short period of time, and it will crash for three or four months for a long time. This type of problem is the most difficult to determine the cause. It will not crash when the motherboard is tested alone or when it is not in the user environment. This kind of problem is related to the user system, even the field wiring and the system's anti-interference ability. I hope that when encountering this kind of problem, we should not blindly push the responsibility to the industrial computer, but guide the user to solve the problem from the surrounding environment.


There are four main reasons for common industrial computer crashes. The user can judge according to the actual situation. The crash situation is more complicated. If the above methods cannot be solved, it is best to contact the manufacturer. Non-professionals should not disassemble and inspect without authorization to avoid causing it. Greater failure.


문의 보내기