First, the splicing of the LCD splicing screen
The stitching directly determines the price of the LCD splicing screen. If the stitching is large, the display effect will not be good. If the stitching is too small, the cost will be more expensive but the display effect will be good. Normally, Shenzhen Aozhen Electronic Technology Co., Ltd. will determine the seams according to customer needs. For different needs, the corresponding seam size is required. At present, the LCD splicing wall on the market has 3.5 seams, because the seams are narrower than 5.3mm. And the price is not as expensive as 1.7mm patchwork, and the overall display effect is good. 3.5mm patchwork is more commonly used.
Second, the size of the LCD splicing screen
The common sizes of LCD splicing screens are 46-inch, 47-inch, 49-inch and 55-inch, 49-inch and 55-inch are more commonly used. First of all, understand how many LCD splicing screens are needed, if the user has not determined the specific size. Just understand how big the area it wants to display. Recommend a suitable splicing screen according to the length and width of the site.
Third, the installation method
The commonly used installation methods of Wuhan Boshi are: wall hanging, floor stand and cabinet. Among them, wall mounting is more convenient, beautiful and cheap. However, when using wall-mounted installation, you must first consider whether the wall can withstand the weight of the LCD splicing screen. In the case that the wall cannot bear the weight and want to save the cost, the only choice is the floor stand. However, the floor stand is not as good-looking in appearance as the wall hanging and cabinet. Therefore, in the installation method, try to understand the customer's needs and give reasonable suggestions.
Fourth, image processing equipment
This refers to the input of the signal type, which is a very important part of the splicing large-screen system, which determines the type of image processor selected; therefore, in the project consultation, it is necessary to know the number of signals to be input and the signal type, so Manufacturers can better choose the right splicing screen processor for the project. Different display methods and application processors have different prices, so there is a big gap in price, so before consulting, be sure to know the type of front-end equipment.
Fifth, the implementation location of the splicing screen project
Usually when the customer consults, it is necessary to ask about the project location and whether it needs to be installed on site. A certain project installation fee is charged according to the distance of the project site, which is used for the travel expenses of the company's engineering and technical personnel. We will send one-to-one professional engineers for one-to-one remote guidance without any charge. If you don't worry about installing on your own, we need to provide on-site installation services, then our company will charge a certain amount of installation according to the size of the project and the location of the project. cost.
Sixth, whether the splicing screen project is invoiced
Many customers need to issue value-added tax invoices, but some customers do not need it, so before quoting the splicing screen project, we need to know whether the project needs to include tax, because it needs to include tax, the company will charge a tax of 10 percent of the project , The company can issue a 17 percent deductible value-added tax invoice. This is what we must understand clearly during the quotation process. The above points need to be understood clearly for a quotation of a splicing screen project. Failure to clarify one of them will affect the quotation. Only when all the above requirements of the customers are understood, our company can make a reasonable quotation plan.
