The touch all-in-one machine is a device that integrates touch screen, industrial control, computer and other technologies, so as to achieve information query, advertising display, media interaction, conference content display, offline experience store product display, etc. It can also meet specific needs such as fingerprint attendance, card swiping, etc. The touch screen includes four- and five-wire resistive screen, surface acoustic wave screen, infrared screen, holographic nano-touch screen and other excellent touch screens at home and abroad, which can meet the application needs according to the user's region and place. The touch all-in-one machine is a touch product that bundles the touch screen and related software together with the outer packaging for inquiry purposes. The touch all-in-one machine really achieves the integration of touch and control, which greatly improves people's work efficiency.
터치 올인{0}
최신 첨단{0}기술 장비 및 기계 중 하나인 터치 올인{2}}기계는 단순한 터치 스크린의 상태를 천천히 대체하고 있으므로 사용자가 진정으로 느낄 수 있습니다. 사람과 기계가 자유롭게 상호작용할 수 있는 기능.
권장 터치 올인{{0}in{1}}한 기기: 가로 터치 올-인{3}}원 기기, 벽-설치형 터치 올인-인{ {6}}머신 1대
가장 일반적으로 사용되는 터치 올인{0}인{1} 유형은 정전식 터치 올인-원 기기와 적외선 터치 올인-입니다. 5}}머신 1대;
정전식 터치 올인원{0}의{1}} 작동 원리:
정전식 터치 올인원 머신의 정전식 터치 스크린은{0}}인체의 전류 감지를 사용하여 작동합니다. 정전식 터치 스크린은 4겹{2}}유리 복합 유리 스크린입니다. 유리 스크린의 내부 표면과 중간층은 각각 산화인듐(ITO) 층으로 코팅되어 있으며, 가장 바깥쪽 층은 얇은 석영 유리 보호 층입니다. 중간층 ITO 코팅은 작업 표면으로 사용되며 4개의 모서리에서 4개의 전극이 그려지며 ITO의 내부 층은 차폐 층으로 사용되어 좋은 작업 환경을 보장합니다.
손가락이 금속층에 닿으면 인체의 전기장과 사용자의 표면과 터치스크린이 복합 정전용량을 형성합니다. 따라서{0}고주파 전류의 경우 커패시턴스는 직접 도체이고 손가락은 접점에서 작은 전류를 끌어옵니다. 이 전류는 터치 스크린의 네 모서리에 있는 전극에서 각각 흐릅니다. 이 4개의 전극에 흐르는 전류는 손가락에서 4개의 모서리까지의 거리에 비례하며, 컨트롤러는 이 4개의 전류의 비율을 정밀하게 계산하여 터치 포인트의 위치를 파악합니다.
적외선 터치스크린의 작동 원리{0}}{1}}하나의 기계
The infrared touch screen of the infrared touch all-in-one machine uses a dense infrared matrix in the x and y directions to detect the user's touch. The infrared touch screen is installed with a circuit board frame in front of the display, and the circuit board is equipped with infrared emitting tubes and infrared receiving tubes on the four sides of the screen. , one-to-one corresponding to a crossed infrared matrix. When the user touches the screen, the finger will block the infrared rays passing through the position, so the position of the touch point on the screen can be determined.
하나의 기계에서{0}{1}터치 올인원의 구조
터치 올인{1}}기기에 통합된 주요 구성요소는 브러시 처리된 알루미늄 전면 프레임, 터치 프레임, 강화 유리, 디스플레이 화면, 금속 후면 쉘, 벽걸이, 산업용 컴퓨터(또는 일반 컴퓨터) 디스플레이 보드, 전원 보드, 확장 보드, 디코더 보드, 전원 코드, 전원 어댑터.
한 대의 컴퓨터에서{0}}모두 터치-: 한 대의 컴퓨터에는 두 가지 유형의 터치가{2}} 있습니다-. 하나는 일반적인 유형의 컴퓨터이고 다른 하나는 산업용 제어 작업 컴퓨터. 산업 제어 작전의 성능은 비교적 우수합니다.
강화유리 : 강화유리는 휴대폰 화면과 동일하며 강화유리는 터치스크린을 보호하는 역할을 합니다.
메탈 백 케이스: 메탈 백 케이스는 터치 일체형{0}}의 변형을{1}}방지하기 위해 필요합니다. 플라스틱 백쉘을 사용하면 몸 전체가 비교적 변형되기 쉽습니다.
The touch all-in-one machine produced by Rongda Caijing, a touch all-in-one machine manufacturer, always adheres to the three-in-one business philosophy of "hardware production, software research and development, and after-sales service", and provides a full range of solutions. Help enterprises to achieve informatization, intelligence and humanity It can help the development of smart factories and digital factories.

